Subaru IMPREZA GD 2007 Series Manual page 3233

asieps_tobira_IM_US.book 24 ページ ２０１２年１月１７日 火曜日 午後３時４８分
BRAKE
7) Remove mud and foreign objects from the cali-
per body assembly.
B: INSTALLATION
1. 15-INCH TYPE
1) Apply a thin coat of Molykote M7439 (Part No.
003602001) to the support.
2) Install the support to the housing.
Tightening torque:
80 N·m (8.2 kgf-m, 59 ft-lb)
3) Apply a thin coat of Molykote M7439 (Part No.
003602001) to the contact surface between the
pad and pad clip.
4) Apply a thin coat of Molykote AS-880N (Part No.
K0777YA010) to both surfaces of the inner shim.
5) Install the pad to support.
6) Install the caliper body to the support.
Tightening torque:
26.5 N·m (2.7 kgf-m, 19.5 ft-lb)
Front Disc Brake Assembly
7) Connect the brake hose using a new brake hose
gasket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
8) Bleed air from the brake system.
2. 16-INCH TYPE
1) Install the caliper body to the housing.
Tightening torque:
80 N·m (8.2 kgf-m, 59 ft-lb)
2) Apply a thin coat of Molykote AS-880N (Part No.
K0777YA010) to both surfaces of the pad inner
shim, and Molykote M7439 (Part No. 003602001)
to the sides of pad.
BR-00597
3) Install the pad to the caliper body.
4) Install the pad pin and cross spring to the caliper
body.
5) Attach the M clip.
6) Connect the brake hose using a new brake hose
gasket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
7) Bleed air from the brake system.
BR-00596
3. 17-INCH TYPE
1) Install the caliper body assembly to the housing.
Tightening torque:
155 N·m (15.8 kgf-m, 114.3 ft-lb)
2) Apply a thin coat of Molykote AS-880N (Part No.
K0777YA010) to both surfaces of the pad inner
shim, and Molykote M7439 (Part No. 003602001)
to the sides of pad.
BR-00601
BR-24
BR-00603
BR-00604