Subaru IMPREZA GD 2007 Series Manual page 3122

asieps_tobira_IM_US.book 15 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3. OUTPUT VOLTAGE
Output voltage can be checked by the following
method. Install a resistor and condenser, then ro-
tate the wheel about 2.75 km/h (2 MPH) or equiva-
lent.
Standard value of output voltage:
0.12 — 1 V (at 20 Hz)
NOTE:
Regarding terminal numbers, please refer to item
1. ABS WHEEL SPEED SENSOR. <Ref. to ABS-
14, ABS WHEEL SPEED SENSOR, INSPECTION,
Front ABS Wheel Speed Sensor.>
60 mV
0
60 mV
20 Hz
17.8 K
(2)
(2)
(1) Oscilloscope
(2) Terminals
D: ADJUSTMENT
Adjust the gap using
26755AA000).
Front ABS Wheel Speed Sensor
(1)
5 % 562 5 %
ABS00146
spacer (Part No.
ABS-15
ABS