Debug Ospf Packet - Allied Telesis IE340 Series Command Reference Manual

OSPF C
OMMANDS

DEBUG OSPF PACKET

debug ospf packet
Overview This command enables debugging options for OSPF packets.
To enable all debugging options, specify debug ospf packet with no additional
parameters.
The no and undebug variant of this command disable OSPF packet debugging.
Use this command without parameters to disable all options.
debug ospf packet [dd] [detail] [hello] [ls-ack] [ls-request]
Syntax
[ls-update] [recv] [send]
no debug ospf packet [dd] [detail] [hello] [ls-ack] [ls-request]
[ls-update] [recv] [send]
Mode Privileged Exec and Global Configuration
awplus#
Examples
awplus#
awplus#
awplus#
Related terminal monitor
commands
undebug ospf packet
C613-50631-01 Rev A
Parameter Description
dd
Specifies debugging for OSPF database descriptions.
detail
Sets the debug option to detailed information.
hello
Specifies debugging for OSPF hello packets.
ls-ack
Specifies debugging for OSPF link state acknowledgments.
ls-request
Specifies debugging for OSPF link state requests.
ls-update
Specifies debugging for OSPF link state updates.
recv
Specifies the debug option set for received packets.
send
Specifies the debug option set for sent packets.
debug ospf packet detail
debug ospf packet dd send detail
no debug ospf packet ls-request recv detail
undebug ospf packet ls-request recv detail
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
1128