Ipsec Transform-Set - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

ipsec transform-set

ipsec transform-set transformSetName transform0
Syntax
[ transform1 [ transform2 [ transform3 [ transform4 [ transform5 ] ] ] ] ]
no ipsec transform-set transformSetName
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates a transform set. Transform sets used for manually configured tunnels can
Description
have only one transform. Transform sets used for signaled tunnels can have up to
six transforms. Transforms are numbered in a priority sequence in the order in which
you enter them. Each transform provides a different combination of data
authentication and confidentiality. The no version deletes the transform set.
Options
Global Configuration
Mode
992
ipsec transform-set
transformSetName Name of the transform set
transform0 through transform5 AH or ESP transform; use the online Help to
view available transforms