Ipsec Local-Endpoint - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

ipsec local-endpoint

[ no ] ipsec local-endpoint ipAddress transport-virtual-router transportVRName
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines a default local endpoint used for ISAKMP/IKE negotiations and all IPSec
Description
tunnels for a transport virtual router. The no version restores the default settings of
the local endpoint.
Options
Global Configuration
Mode
988
ipsec local-endpoint
ipAddress IP address to use as the local endpoint
transportVRName Name of transport virtual router in which the IP address is
defined