Installing A Tn802B In Ip Trunk Mode; Task List: Install The Tn802B In Ip Trunk Mode - Avaya MCC1 Installation And Upgrades

Media gateways installation and avaya definity server si upgrades made easy
Hide thumbs Also See for MCC1:
Table of Contents

Advertisement

Add IP Solutions

Installing a TN802B in IP Trunk Mode

To test the external IP connections, ping the IP Interface server, and ping a known computer connected to
your network. If everything is configured correctly, the Result column on the Ping Results screen
reads
. If it reads
pass
cabling.
1
Type
ping ip-address nnn.nnn.nnn.nnn board UUCSS
nnn.nnn.nnn.nnn
and slot of the TN802B IP Interface.
2
Type
ping ip-address nnn.nnn.nnn.nnn board UUCSS
nnn.nnn.nnn.nnn
and slot of the TN802B IP Interface.
3
Type
ping ip-address nnn.nnn.nnn.nnn board UUCSS
nnn.nnn.nnn.nnn
cabinet, carrier, and slot of the TN802B IP Interface.
Return to Task List
Installing a TN802B in IP Trunk Mode
Return to Task List
NOTE:
IP Trunk mode should only be used to maintain compatibility with existing Release 7 IP
Trunk or ITS-E installations. We strongly recommend that MedPro mode be used
whenever possible.

Task list: Install the TN802B in IP Trunk mode

1
Prepare for Installation
2
Check your Shipment
3
Connect the Cables for TN802B
4
Connect the Modem
5
Connect the Monitor, Keyboard, and Mouse
6
Connect the Ethernet
7
Install the Circuit Pack
8
Test the Modem
9
Administer the IP Interface
10
Log onto the TN802B Interface Server
11
Change Mu-Law to A-Law (for systems using A-Law companding only)
12
Assign Server and Domain Names
13
Assign an IP Address
14
Assign Default Gateway
626
, verify the IP-address information and check the connectivity, including the
abort
is the IP address of the TN802B IP Interface and
is the IP address of the customer's gateway and
is the IP address of another computer beyond the gateway and
on page 627
on page 627
on page 629
on page 629
on page 631
on page 631
on page 633
on page 633
on page 634
on page 636
on page 636
on page 638 if you use gateways.
and press Enter. The variable
UUCSS
and press Enter. The variable
UUCSS
and press Enter. The variable
on page 630
SI Installation and Upgrades
is the cabinet, carrier,
is the cabinet, carrier,
UUCSS
is the
on page 635
June 2004

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scc1

Table of Contents