Configure Interface Ethernet Qos Module Mark-Dscp; Configure Interface Ethernet Qos Module Mark-User-Priority - Avaya 2330 Reference Manual
Advanced gateway
Hide thumbs
Also See for 2330:
- Manual (176 pages) ,
- Regulatory information (72 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
Ethernet module QoS commands
configure interface ethernet qos module mark-dscp
Use this command to configure the DSCP value to apply for marking of untagged packets
ingressing on the interface.
Syntax
[no] mark-dscp <dscp-value>
Table 229: Variable definitions
<dscp-value>
[no]
Example
AG/configure/interface/ethernet (6/12)/qos/module# mark-dscp 63
configure interface ethernet qos module mark-user-
priority
Use this command to configure the user priority value to apply for marking of untagged packets
ingressing on the interface
Syntax
[no] mark-user-priority <user-priority-value>
Table 230: Variable definitions
<user-priority-value>
[no]
Example
AG/configure/interface/ethernet (6/12)/qos/module# mark-user-
priority 6
228
Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
The DSCP value marked for the IP packets.
Valid Range: 0-63
Removes the marking
Value
The user priority value marked for the
untagged packet. Valid Range: 0-7
Removes the marking
August 2013
Advertisement
Table of Contents
