Atm Cac - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

atm cac

Syntax
Release Information
Description
Options
Mode
162
[ no ] atm cac [ subscriptionBandwidth ] [ ubr ubrWeight ]
Command introduced before JunosE Release 7.1.0.
Enables CAC on the ATM interface. If the subscription limit or UBR weight parameters
are set to zero, the router uses the effective port bandwidth as the subscription bandwidth.
The effective bandwidth varies according to line module. The no version disables CAC
on the interface.
NOTE: If you modify one of these parameters after CAC is enabled, you must
modify both parameters. Otherwise, the parameter not specified reverts to
its default value.
subscriptionBandwidth—Maximum allowable bandwidth on this port in the range
0–2147482647 Kbps; default value is 0
ubrWeight—Bandwidth associated with UBR and UBR-PCR connections in the range
0–2147482647 Kbps; default value is 0
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.