Atm Bulk-Config Shutdown - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

atm bulk-config shutdown

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] atm bulk-config bulkConfigName shutdown
[ vc-range vpiStart vpiEnd vciStart vciEnd ]
Command introduced before JunosE Release 7.1.0.
Administratively disables (shuts down) the specified VC range or subrange. The no version
reenables the specified VC range or the specified subranges; this is the default condition.
bulkConfigName—Name of the VC range; string of up to 80 characters
vpiStart—Starting virtual path identifier (inclusive) of the VC subrange you are
configuring
vpiEnd—Ending virtual path identifier (inclusive) of the VC subrange you are configuring
vciStart—Starting virtual circuit identifier (inclusive) of the VC subrange you are
configuring
vciEnd—Ending virtual circuit identifier (inclusive) of the VC subrange you are configuring
Interface Configuration
Chapter 2: A Commands
161