Authentication-Key - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

authentication-key

Syntax
Release Information
Description
Options
Mode
194
authentication-key [ 0 | 8 ] authKey
no authentication-key
Command introduced before JunosE Release 7.1.0.
Enables simple password authentication and assigns a password used by OSPF remote
neighbors. The no version deletes the password.
0—Indicates the authKey is entered in unencrypted form (plaintext); this is the default
option
8—Indicates the authKey is entered in encrypted form (ciphertext)
authKey—Password; string of up to 8 characters
Remote Neighbor Configuration
Copyright © 2010, Juniper Networks, Inc.