Atm Snmp Trap Link-Status - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

atm snmp trap link-status

Syntax
Release Information
Description
Mode
184
[ no ] atm snmp trap link-status
Command introduced before JunosE Release 7.1.0.
Enables SNMP link status traps on the ATM layer on a per-interface basis. The no version
disables the traps.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.