Aps Manual - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

aps manual

Syntax
Release Information
Description
Options
Mode
118
aps manual channelNumber
no aps manual
Command introduced before JunosE Release 7.1.0.
Forces the working interface to switch to the protect interface, unless a request of equal
or higher priority exists. The no version allows the specified working interface to resume
the active role.
channelNumber—One of the following channel numbers:
0—Switches from the protect interface back to the working interface
1—Switches from the working interface to the protect interface
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.