Agent Context-Name - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

agent context-name

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
agent context-name contextName [ wildcard ] [ limit contextNameLimit ]
no agent
Command introduced before JunosE Release 7.1.0.
Specifies the virtual router SNMP agent on which you want to poll MIB objects. The no
version returns the context name to the default context (virtual router).
contextName—Context name of the agent
NOTE: The contextName value is the virtual router number in the order the
virtual router was created (for example, router1, router2, and so on). Use the
show snmp agent command to obtain the context name for the virtual router.
wildcard—Specifies that the context name is a wildcard value
contextNameLimit—Maximum number of agents to be polled
SNMP Trigger Configuration
Chapter 2: A Commands
107