Address Network - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

address network

Syntax
Release Information
Description
Options
Mode
98
address { ipAddress | unnumbered interfaceType interfaceSpecifier }
network { broadcast | non-broadcast | point-to-point }
no address { ipAddress | unnumbered interfaceType interfaceSpecifier } network
Command introduced before JunosE Release 7.1.0.
Configures the OSPF network type for the specified interface to something other than
the default for the network medium. The no version restores the default value for the
medium.
NOTE: You must issue the address area command before issuing this
command.
ipAddress—OSPF interface address previously specified with the address command
unnumbered—Indicates that OSPF is running on an unnumbered interface previously
specified with the address command
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
broadcast—Sets network type to broadcast
non-broadcast—Sets network type to NBMA
point-to-point—Sets network type to point-to-point
Router Configuration
Copyright © 2010, Juniper Networks, Inc.