Atm Oam Loopback-Location - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

atm oam loopback-location

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
atm oam loopback-location locationID
[ no ] atm oam loopback-location
Command introduced before JunosE Release 7.1.0.
Sets the location ID of the ATM interface. The no version returns the loopback location
to the default setting of all 1s (ones).
locationID—Value of the four-octet long location ID of the ATM interface
Interface Configuration
Chapter 2: A Commands
177