Baseline Ip Http - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

baseline ip http

Syntax
Release Information
Description
Mode
232
baseline ip http
Command introduced in JunosE Release 7.2.0.
Sets a baseline for HTTP local server statistics. The router implements the baseline by
reading and storing the statistics at the time the baseline is set and then subtracting this
baseline whenever baseline-relative statistics are retrieved. There is no no version.
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.