Table of Contents
Advertisement
area virtual-link retransmit-interval
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] area { areaId | areaIdInt } virtual-link ipAddress retransmit-interval retransmInterval
Command introduced before JunosE Release 7.1.0.
Defines an OSPF virtual link and the time between link-state advertisement
retransmissions for the adjacency belonging to the virtual link. The no version removes
the virtual link's retransmit interval.
areaId—OSPF area ID in IP address format.
areaIdInt—OSPF area ID as a decimal value in the range 0–4294967295
ipAddress—IP address of the virtual link neighbor
retransmInterval—LSA retransmit interval; an integer in the range 0–3600 seconds;
default value is 5 seconds
Router Configuration
Chapter 2: A Commands
139
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 and is the answer not in the manual?
Questions and answers