Arp Timeout - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

arp timeout

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
arp timeout timeoutVal
no arp timeout
Command introduced before JunosE Release 7.1.0.
Specifies how long an entry remains in the ARP cache. You can set the ARP timeout on
Fast Ethernet, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces, and bridged Ethernet
interfaces configured over ATM 1483. The default value is 21600 seconds (6 hours). Use
the show configuration command to display the current value. The no version restores
the default value.
timeoutVal—Time in seconds that an entry remains in the ARP cache
Interface Configuration
Chapter 2: A Commands
143