Bandwidth Oversubscription - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

bandwidth oversubscription

Syntax
Release Information
Description
Mode
212
[ no ] bandwidth oversubscription
Command introduced before JunosE Release 7.1.0.
Allows the line modules to operate below line rate performance. The no version forces
the line modules to operate at line rate performance.
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.