Baseline Cops - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

baseline cops

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
baseline cops
Command introduced in JunosE Release 7.1.0.
Sets a baseline for the Common Open Policy Service (COPS) statistics. The router
implements the baseline by reading and storing the statistics at the time the baseline is
set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
There is no no version.
Privileged Exec
Chapter 3: B Commands
221