Atm Vp-Description - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

atm vp-description

Syntax
Release Information
Description
Options
Mode
188
atm vp-description vpi description
no atm vp-description vpi
Command introduced before JunosE Release 7.1.0.
Assigns a text description to an individual virtual path (VP) on an ATM interface. Use the
show atm vp-description command to display the description. The no version restores
the default value, a null string.
vpi—Virtual path identifier number in the range 0–255
description—Text string or alias for the specified VPI; up to 32 characters
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.