Atm Mcpt-Timers - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

atm mcpt-timers

Syntax
Release Information
Description
Options
Mode
Related
Documentation
174
atm mcpt-timers timer1 timer2 timer3
no atm mcpt-timers
Command introduced before JunosE Release 7.1.0.
Configures systemwide values for the three ATM Martini cell packing timers. These timers
define the time threshold that the router uses to collect and concatenate ATM cells in a
single VCC cell relay–encapsulated packet and transmit the packet on an MPLS
pseudowire connection. When the timer expires, the router forwards the packet even if
the number of concatenated ATM cells in the packet is fewer than the specified maximum
number of cells per packet. The no version restores the default values for all three timers.
NOTE: See the atm cell-packing command for information about specifying
the maximum number of concatenated cells per packet and identifying which
of the three ATM Martini cell packing timers you want to use to detect timeout
of the cell collection threshold.
timer1—Number of microseconds in the range 100–4095; default value is 100
timer2—Number of microseconds in the range 100–4095; default value is 500
timer3—Number of microseconds in the range 100–4095; default value is 1000
Global Configuration
Configuring an MPLS Pseudowire with VCC Cell Relay Encapsulation in the JunosE BGP
and MPLS Configuration Guide
Copyright © 2010, Juniper Networks, Inc.