Aaa Subscriber Limit Per-Vr - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

aaa subscriber limit per-vr

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
aaa subscriber limit per-vr limitValue
no aaa subscriber limit per-vr
Command introduced before JunosE Release 7.1.0.
Sets the maximum number of active subscribers permitted on the virtual router. The no
version returns the limit to the default, 0 (zero).
limitValue—Maximum number of subscribers; default value is 0 (zero), which means
there is no limit on the number of subscribers
Global Configuration
Chapter 2: A Commands
59