JunosE 11.3.x Command Reference Guide A to M
atm oam flush
Syntax
Release Information
Description
Options
Mode
176
[ no ] atm oam flush [ alarm-cells ]
Command introduced before JunosE Release 7.1.0.
Configures the router to ignore all OAM cells received on an ATM interface, and to stop
sending OAM cells on this interface. OAM performs fault management and performance
management functions on an ATM interface. The no version disables OAM flush on the
interface.
alarm-cells—Causes the router to ignore only AIS and RDI cells and to accept all other
OAM cells
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.