Authentication Mode - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

authentication mode

Syntax
Release Information
Description
Options
Mode
196
authentication mode { text | md5 keyID }
no authentication mode
Command introduced before JunosE Release 7.1.0.
Specifies the type of authentication used on the RIP remote-neighbor interface.
Authentication is disabled by default. The no version removes authentication from the
interface. Supported only in RIP version 2.
text—Sends a simple text password with each RIP message; if the password is not
possessed by remote neighbors, the message is rejected
md5—Encrypts and compresses the RIP message with MD5 message-digest algorithms
keyID—Number identifying the MD5 key in the range 1–255; remote neighbors must
share the MD5 key to decrypt the message and encrypt the response
Remote Neighbor Configuration
Copyright © 2010, Juniper Networks, Inc.