Arp Spoof-Check - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

arp spoof-check

Syntax
Release Information
Description
Mode
142
[ no ] arp spoof-check
Command introduced in JunosE Release 9.3.0.
Configures the router to check for spoofed ARP packets received on an IP interface. By
default, the router checks all ARP packets received on a major IP interface or a
subinterface to identify and discard spoofed ARP packets. The no version disables
checking for spoofed ARP packets received on the interface.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.