Bandwidth - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

bandwidth

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
bandwidth bandwidth
no bandwidth
Command introduced before JunosE Release 7.1.0.
Specifies the total bandwidth available on the interface. For total reservable bandwidth,
see the mpls bandwidth command. The no version removes the admission control
configuration from the interface.
bandwidth—Available bandwidth in kilobits per second, a value from 1–10,000,000
Interface Configuration, Subinterface Configuration
ospf bandwidth
Chapter 3: B Commands
211