Area Virtual-Link Dead-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

area virtual-link dead-interval

Syntax
Release Information
Description
Options
Mode
136
[ no ] area { areaId | areaIdInt } virtual-link ipAddress dead-interval deadInterval
Command introduced before JunosE Release 7.1.0.
Defines an OSPF virtual link and the time interval allowed for detecting a dead router.
The no version removes the virtual link's dead interval.
areaId—OSPF area ID in IP address format
areaIdInt—OSPF area ID as a decimal value in the range 0–4294967295
ipAddress—IP address of the virtual link neighbor
deadInterval—Integer in the range 0–2147483647 seconds; default value is 40 seconds
Router Configuration
Copyright © 2010, Juniper Networks, Inc.