Aaa Duplicate-Prefix-Check - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

aaa duplicate-prefix-check

Syntax
Release Information
Description
Options
Mode
42
[ no | default ] aaa duplicate-prefix-check { enable | disable }
Command introduced in JunosE Release 11.2.0.
Configures AAA to enable duplicate IPv6 prefix-check in a virtual router context. Duplicate
IPv6 prefix checking by AAA is disabled by default . The default version restores the
default condition. The no version disables the duplicate IPv6 prefix-check capability.
enable—Specifies the feature
disable—Disables the feature; this is the default
Global Configuration
Copyright © 2010, Juniper Networks, Inc.