Baseline Log - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

baseline log

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
baseline log [ last-reset | time [ utc ] month day year ]
Command introduced before JunosE Release 7.1.0.
Sets a baseline for logging events. To use the current system time, do not enter any
options. There is no no version.
last-reset—Causes the router to display log messages generated since the last time
the router was reset
time—Time and date after which the router displays messages that are timestamped.
To set the time, use the following syntax:
Hour:Minute[:Second]—Current time in 24-hour format; seconds are optional
utc—Indicates that the time entered is UTC (GMT) time; if you do not include this
keyword, the router considers the time entered to be local time
month—Name of the month in English
day—Number of the day in the range 1–31
year—Four-digit number of the year
Privileged Exec
Chapter 3: B Commands
253