Baseline Line Interface Sonet - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

baseline line interface sonet

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
baseline line interface sonet interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Sets a statistics baseline for SONET/SDH statistics at the line layer. The router implements
the baseline by reading and storing the MIB statistics at the time the baseline is set and
then subtracting this baseline whenever baseline-relative statistics are retrieved. There
is no no version.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Privileged Exec
Chapter 3: B Commands
251