Aaa User Accounting Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

aaa user accounting interval

Syntax
Release Information
Description
Options
Mode
74
aaa user accounting interval period
no aaa user accounting interval
Command introduced in JunosE Release 9.0.0.
Specifies the default user accounting interval used on the virtual router. This router uses
this value for users when no value is specified in the RADIUS Acct-Interim-Interval attribute
(RADIUS attribute 85). The no version restores the default setting of 0, which turns off
interim accounting for users attached to this virtual router.
NOTE: This command and the aaa service accounting interval command
replace the deprecated aaa accounting interval command, which may be
removed completely in a future release.
period—Accounting interval in minutes in the range 10–1440, which sets the time period
between accounting updates for users on this virtual router; 0 is the default
Global Configuration
Copyright © 2010, Juniper Networks, Inc.