Area Virtual-Link Hello-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

area virtual-link hello-interval

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] area { areaId | areaIdInt } virtual-link ipAddress hello-interval helloInterval
Command introduced before JunosE Release 7.1.0.
Defines an OSPF virtual link and the time between the hello packets. The hello interval
value must be the same for both ends of the virtual link. The no version removes the
virtual link's hello interval.
areaId—OSPF area ID in IP address format.
areaIdInt—OSPF area ID as a decimal value in the range 0–4294967295
ipAddress—IP address associated with the virtual link neighbor
helloInterval—Integer in the range 1–65535 seconds; default value is 10 seconds
Router Configuration
Chapter 2: A Commands
137