Area Virtual-Link Authentication-Key - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

Software for e series broadband services routers command reference a to m
Table of Contents

Advertisement

area virtual-link authentication-key

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] area { areaID | areaIdInt } virtual-link ipAddress authentication-key [ 0 | 8 ] key
Command introduced before JunosE Release 7.1.0.
Configures simple password (type 1) authentication for OSPF virtual links. The no version
removes the password.
areaId—OSPF area ID in IP address format
areaIdInt—OSPF area ID as a decimal value in the range 0–4294967295
ipAddress—IP address of the virtual link neighbor
0—Indicates the key is entered in unencrypted form (plaintext); this is the default option
8—Indicates the key is entered in encrypted form (ciphertext)
key—Password to be used by neighbors; string of up to 16 alphanumeric characters.
All neighboring routers on the same network must have the same password.
Router Configuration
Chapter 2: A Commands
133

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 and is the answer not in the manual?

This manual is also suitable for:

Junose 11.3

Table of Contents