Aggressive-Mode - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

aggressive-mode

Syntax
Release Information
Description
Options
Mode
110
aggressive-mode { accepted | requested | required }
no aggressive-mode
Command introduced before JunosE Release 7.1.0.
accepted, requested, and required keywords added in JunosE Release 7.3.0.
Enables aggressive mode negotiation for the tunnel. The no version restores the default,
no aggressive mode.
accepted—Accepts aggressive mode when proposed by peers
requested—Requests aggressive mode when negotiating with peers
required—Only requests and accepts aggressive mode when negotiating with peers
IKE Policy Configuration
Copyright © 2010, Juniper Networks, Inc.