Baseline Sscc - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

baseline sscc

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
baseline sscc
Command introduced in JunosE Release 7.1.0.
Sets a baseline for the SRC statistics. The router implements the baseline by reading
and storing the statistics at the time the baseline is set and then subtracting this baseline
whenever baseline-relative statistics are retrieved. There is no no version.
Privileged Exec
Chapter 3: B Commands
267