area virtual-link authentication-none
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] area { areaId | areaIdInt } virtual-link ipAddress authentication-none
Command introduced before JunosE Release 7.1.0.
Specifies that no authentication is to be used for the virtual link. The no version has no
effect.
areaId—OSPF area ID in IP address format
areaIdInt—OSPF area ID as a decimal value in the range 0–4294967295
ipAddress—IP address of the virtual link neighbor
Router Configuration
Chapter 2: A Commands
135