Aaa Tunnel Calling-Number-Format-Fallback - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

aaa tunnel calling-number-format-fallback

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
aaa tunnel calling-number-format-fallback
{ descriptive |
fixed [ stacked ] |
fixed-adapter-embedded [ stacked ] |
fixed-adapter-new-field [ stacked ] }
no aaa tunnel calling-number-format-fallback
Command introduced in JunosE Release 8.1.0.
fixed-adapter-embedded, fixed-adapter-new-field, and stacked keywords added in
JunosE Release 10.0.0.
Configures the fallback format for the tunnel calling number to be passed by the E Series
L2TP access concentrator (LAC) to the L2TP network server (LNS) in the L2TP Calling
Number attribute value pair (AVP) 22 when the PPPoE agent circuit ID is null or
unavailable. The fallback format is used only when the configured calling number format
includes either or both of the agent-circuit-id and agent-remote-id suboptions. The no
version restores the default fallback format, descriptive.
descriptive—Configures the fallback format in descriptive format that includes only
interface information
fixed—Configures the fallback format in a fixed format of up to 15 characters consisting
of all ASCII fields, similar to the fixed format of RADIUS attribute 31 (Calling-Station-Id):
Fallback format for ATM interfaces:
systemName (up to 4 bytes) slot (2 bytes) port (1 byte) VPI (3 bytes)
VCI (5 bytes)
Fallback format for Ethernet interfaces:
systemName (up to 4 bytes) slot (2 bytes) port (1 byte) VLAN (8 bytes)
Fallback format for serial interfaces:
systemName (up to 4 bytes) slot (2 bytes) port (1 byte) 0 (8 bytes)
In the case of PPP terminated from LNS, the Calling-Station-Id attribute is the value
passed as the calling-station AVP.
fixed-adapter-embedded—Configures the fallback format in a fixed format of up to
15 characters consisting of all ASCII fields with a 1-byte slot field, 1-byte adapter field,
and 1-byte port field:
Fallback format for ATM interfaces:
systemName (up to 4 bytes) slot (1 byte) adapter (1 byte) port (1 byte)
VPI (3 bytes) VCI (5 bytes)
Fallback format for Ethernet interfaces:
systemName (up to 4 bytes) slot (1 byte) adapter (1 byte) port (1 byte)
VLAN (8 bytes)
Chapter 2: A Commands
65