Aaa Tunnel Switch-Profile - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

aaa tunnel switch-profile

Syntax
Release Information
Description
Options
Mode
72
aaa tunnel switch-profile profileName
no aaa tunnel switch-profile
Command introduced in JunosE Release 7.2.0.
Applies a default L2TP tunnel switch profile to a virtual router. The default tunnel switch
profile defines the L2TP tunnel switching behavior for the interfaces to which this profile
is assigned. The router uses the default tunnel switch profile if the tunnel attributes
returned from an AAA domain map or tunnel group or from a RADIUS authentication
server do not include a named tunnel switch profile. The no version removes the default
tunnel switch profile assignment from the virtual router.
profileName—Name of the default tunnel switch profile; a string of up to 64
alphanumeric characters
Global Configuration
Copyright © 2010, Juniper Networks, Inc.