Atm Aal5 Snmp Trap Link-Status - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

atm aal5 snmp trap link-status

Syntax
Release Information
Description
Mode
148
[ no ] atm aal5 snmp trap link-status
Command introduced before JunosE Release 7.1.0.
Enables SNMP link status traps on the AAL5 layer on a per-interface basis. The no version
disables the traps.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.