Baseline Dhcp - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

baseline dhcp

Syntax
Release Information
Description
Options
Mode
Related
Documentation
222
baseline dhcp { server | relay }
Command introduced before JunosE Release 7.1.0.
Sets a statistics baseline for DHCP relay and DHCP relay proxy statistics. The router
implements the baseline by reading and storing the statistics at the time the baseline is
set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
There is no no version.
server—Sets baseline for DHCP proxy server statistics
relay—Sets baseline for DHCP relay statistics
Privileged Exec
Setting Baselines for DHCP Statistics
Copyright © 2010, Juniper Networks, Inc.