Baseline Mpls Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

baseline mpls interface

Syntax
Release Information
Description
Options
Mode
Related
Documentation
254
baseline mpls interface interfaceName
Command introduced in JunosE Release 7.1.0.
Sets a statistics baseline for the specified MPLS major interface or MPLS shim interface.
By default, the interface counters are baselined at zero. There is no no version.
interfaceName—Name of interface; up to 15 alphanumeric characters
Privileged Exec
Setting Baselines for Layer 2 Services over MPLS in the JunosE BGP and MPLS
Configuration Guide
Copyright © 2010, Juniper Networks, Inc.