Authorization - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

authorization

Syntax
Release Information
Description
Options
Mode
198
authorization { exec | commands level } authorListName
no authorization {exec | commands level }
Command introduced before JunosE Release 7.1.0.
Enables AAA authorization for a specified vty line or group of vty lines. Associates the
authorization list with the specified line. If the list does not exist or is empty, authorization
always succeeds. For a command to be authorized, its level must match exactly with the
level of one of the configured lists. The no version disables authorization.
exec—Applies this authorization to CLI access in general
commands—Applies this authorization to user commands of the specified privilege
level
level—Privilege level; a number in the range 0–15
authorListName—Name of an authorization method list of up to 32 characters; if no
methods list is specified, the default is used
Line Configuration
Copyright © 2010, Juniper Networks, Inc.