Aaa Accounting Acct-Stop On-Access-Deny - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

aaa accounting acct-stop on-access-deny

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
aaa accounting acct-stop on-access-deny { enable | disable }
no aaa accounting acct-stop on-access-deny
Command introduced before JunosE Release 7.1.0.
Issues an Acct-Stop message if RADIUS denies access. The no version returns the
parameter to the default of disable.
enable—Specifies the feature
disable—Disables the feature; this is the default setting
Global Configuration
Chapter 2: A Commands
21