JunosE 11.3.x Command Reference Guide A to M
aaa accounting acct-stop on-aaa-failure
Syntax
Release Information
Description
Options
Mode
20
aaa accounting acct-stop on-aaa-failure { enable | disable }
no aaa accounting acct-stop on-aaa-failure
Command introduced before JunosE Release 7.1.0.
Configures AAA to send an Acct-Stop message if a user fails AAA, but RADIUS grants
access. The no version returns the parameter to the default of enable.
enable—Specifies the feature; this is the default setting
disable—Disables the feature
Global Configuration
Copyright © 2010, Juniper Networks, Inc.