Usb Vbus Droop Control Raw Interrupt Status Register (Usbvdcim); Usb Vbus Droop Control Raw Interrupt Status Register (Usbvdcim) Field Descriptions - Texas Instruments Concerto F28M36 Series Technical Reference Manual

Register Descriptions
18.5.57 USB VBUS Droop Control Interrupt Mask Register (USBVDCIM), offset 0x438
The USB VBUS droop control interrupt mask 32-bit register (USBVDCIM) specifies the interrupt mask of
the VBUS droop.
Mode(s): OTG A or Host
USBVDCIM is shown in
Figure 18-68. USB VBUS Droop Control Raw Interrupt Status Register (USBVDCIM)
31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 18-73. USB VBUS Droop Control Raw Interrupt Status Register (USBVDCIM)
Bit Field Value
31-1 Reserved 0
0 VD
0
1
1408
M3 Universal Serial Bus (USB) Controller
Figure 18-68 and described in
Reserved
R-0
Field Descriptions
Description
Reserved. Reset is 0x0000.000.
VBUS Droop Interrupt Mask.
The raw interrupt signal from a detected VBUS droop is sent to the interrupt controller.
A detected VBUS droop does not affect the interrupt status.
Copyright © 2012–2019, Texas Instruments Incorporated
Table 18-73.
SPRUHE8E – October 2012 – Revised November 2019
Submit Documentation Feedback
www.ti.com
1 0
VD
R/W-0