Usb Device Resume Raw Interrupt Status Register (Usbdrris); Usb Device Resume Raw Interrupt Status Register (Usbdrris) Field Descriptions - Texas Instruments Concerto F28M36 Series Technical Reference Manual

Register Descriptions
18.5.51 USB Device RESUME Raw Interrupt Status Register (USBDRRIS), offset 0x410
The USB device RESUME raw interrupt status register (USBDRRIS) is the raw interrupt status register.
On a read, this register gives the current raw status value of the corresponding interrupt prior to masking.
A write has no effect.
Mode(s): OTG A or Host
USBDRRIS is shown in
Figure 18-62. USB Device RESUME Raw Interrupt Status Register (USBDRRIS)
31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Bit Field Value
31-1 Reserved 0
0 PF
0
1
1402
M3 Universal Serial Bus (USB) Controller
OTG B or Device
Figure 18-62 and described in
Reserved
R-0
Table 18-67. USB Device RESUME Raw Interrupt
Status Register (USBDRRIS) Field Descriptions
Description
Reserved. Reset is 0x0000.000.
RESUME Interrupt Status
This bit is cleared by writing a 1 to the RESUME bit in the USBDRISC register.
A RESUME status has been detected.
An interrupt has not occurred.
Copyright © 2012–2019, Texas Instruments Incorporated
Table 18-67.
SPRUHE8E – October 2012 – Revised November 2019
www.ti.com
1 0
RESUME
R-0
Submit Documentation Feedback