Usb Device Resume Raw Interrupt Status Register (Usbdrris); Usb Device Resume Raw Interrupt Status Register (Usbdrris) Field Descriptions - Texas Instruments Concerto F28M36 Series Technical Reference Manual

www.ti.com
18.5.52 USB Device RESUME Raw Interrupt Mask Register (USBDRIM), offset 0x414
The USB device RESUME raw interrupt status register (USBDRIM) is the masked interrupt status register.
On a read, this register gives the current masked status value of the corresponding interrupt. A write has
no effect.
Mode(s): OTG A or Host
USBDRIM is shown in
Figure 18-63. USB Device RESUME Raw Interrupt Status Register (USBDRRIS)
31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Bit Field Value
31-1 Reserved 0
0 PF
0
1
SPRUHE8E – October 2012 – Revised November 2019
Submit Documentation Feedback
OTG B or Device
Figure 18-63 and described in
Reserved
R-0
Table 18-68. USB Device RESUME Raw Interrupt
Status Register (USBDRRIS) Field Descriptions
Description
Reserved. Reset is 0x0000.000.
RESUME Interrupt Mask
The raw interrupt signal from a detected RESUME is sent to the interrupt controller. This bit should only
be set when a SUSPEND has been detected (the SUSPEND bit in the USBIS register is set).
A detected RESUME does not affect the interrupt status.
Copyright © 2012–2019, Texas Instruments Incorporated
Table 18-68.
M3 Universal Serial Bus (USB) Controller
Register Descriptions
1 0
RESUME
R-0
1403