Register Descriptions
18.5.59 USB ID Valid Detect Raw Interrupt Status Register (USBIDVRIS), offset 0x444
The USB ID valid detect raw interrupt status 32-bit register (USBIDVRIS) specifies whether the unmasked
interrupt status of the ID value is valid.
Mode(s):
OTG-specific functions
USBIDVRIS is shown in
Figure 18-70. USB ID Valid Detect Raw Interrupt Status Register (USBIDVRIS)
31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 18-75. USB ID Valid Detect Raw Interrupt Status Register (USBIDVRIS) Field Descriptions
Bit
Field
Value
31-1
Reserved
0
0
VD
0
1
1410
M3 Universal Serial Bus (USB) Controller
Figure 18-70
and described in
Reserved
R-0
Description
Reserved. Reset is 0x0000.000.
ID Valid Detect Raw Interrupt Status
This bit is cleared by writing a 1 to the ID bit in the USBIDVISC register.
A valid ID has been detected.
An interrupt has not occurred.
Copyright © 2012–2019, Texas Instruments Incorporated
Table
18-75.
SPRUHE8E – October 2012 – Revised November 2019
Submit Documentation Feedback
www.ti.com
1
0
ID
R-0