www.ti.com
18.5.60 USB ID Valid Detect Interrupt Mask Register (USBIDVIM), offset 0x448
The USB ID valid detect interrupt mask 32-bit register (USBIDVIM) specifies the interrupt mask of the ID
valid detection.
Mode(s):
OTG-specific functions
USBIDVIM is shown in
Figure 18-71. USB ID Valid Detect Interrupt Mask Register (USBIDVIM)
31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 18-76. USB ID Valid Detect Interrupt Mask Register (USBIDVIM) Field Descriptions
Bit
Field
Value
31-1
Reserved
0
0
VD
0
1
SPRUHE8E – October 2012 – Revised November 2019
Submit Documentation Feedback
Figure 18-71
and described in
Reserved
R-0
Description
Reserved. Reset is 0x0000.000.
ID Valid Detect Interrupt Mask
The raw interrupt signal from a detected ID valid is sent to the interrupt controller.
A detected ID valid does not affect the interrupt status.
Copyright © 2012–2019, Texas Instruments Incorporated
Table
18-76.
M3 Universal Serial Bus (USB) Controller
Register Descriptions
1
0
ID
R/W-0
1411